The Rako Lighting wired product range allows install complex and large lighting control system providing const effective and efficient solutions to any size house or commercial project.
Need to build a multi-room or full house system – RAKO WIRED COMING SOON

The WAVMI lets suitable mains-voltage inputs trigger actions on a Rako wired system.
Rako WCM keypad electronics for a compatible Rako lighting system. Select the required button layout; the matching cover plate is separate.
The WK-CONNECT provides a compact connection between the Rako wired network cable and compatible equipment.
The WK-MOD is a programmable modular keypad for the Rako wired network. A compatible surround completes the assembly.
The WLED150CV1 dims compatible constant-voltage LED loads from a Rako wired network. Its capacity depends on the LED supply voltage.
The WLED30CV4 controls compatible constant-voltage LED loads for colour or multi-channel lighting.
The WLED75CV1 dims compatible constant-voltage LED loads from a Rako wired network. Its capacity depends on the LED supply voltage.
The WMR-DLI provides multi-room DALI control from a Rako wired network.
The WP-CON provides an accessible connection point to the Rako wired network.
The WSR-DLI controls up to 64 compatible DALI ballasts from a Rako wired network, arranged within 15 channels in a single room.
The WSR-DMX links a Rako wired control network to compatible DMX lighting equipment. It controls the first 15 DMX channels.
The RAK8-S provides eight switching channels for a centralised Rako lighting installation.
The RAK8-MB is the central housing and motherboard for up to eight Rako plug-in lighting or control modules. Select output cards to suit each circuit rather than assuming all eight outputs have the same capability.
The RAK-LINK powers the Rako wired network and connects it to RAK8 racks. It maps up to 32 circuits across four RAK8 units.
The RAK-STAR provides 16-way distribution for a Rako network where CAT5 or CAT6 cables return to a central location.
The WDA-600 is a RAK8-MB module for compatible 0–10V, DSI or DALI controlled lighting. Select the required control output during configuration in Rasoft Pro.
The WM-CUB is a plug-in curtain and blind control card for the RAK8-MB motherboard. It provides open, stop and close control for a compatible motor arrangement.
The WML-300 is a leading-edge dimmer card for the Rako RAK8-MB motherboard. Choose it for loads confirmed as suitable for leading-edge dimming.
The WMS-600 is a plug-in switching card for the RAK8-MB motherboard. It controls compatible non-dimmable mains loads on and off.
RAK8-MB trailing-edge dimmer card: 200W maximum mains LED load, 400W mains halogen, 1W minimum. Requires a RAK8-MB motherboard.
Eight-input interface for third-party latching or retractive switches on a Rako wired system. 64 × 40 × 15mm; WK-HUB and Rasoft Pro required for setup.
The WK-HUB connects the Rako wired network to Ethernet for local programming, app control and compatible integrations. It also links wired and wireless Rako control.
The WK-PIR is a presence sensor for the Rako wired network. A WK-HUB is required to program and operate it.
The WCM-020 is a Rako wired keypad for simple configurable on/off or other assigned actions. Its buttons send commands over the Rako control network; the lighting or motor load is connected to a separate controller.
The WCM-030 is a Rako wired keypad for configurable control, including open/stop/close. Its buttons send commands over the Rako control network; the lighting or motor load is connected to a separate controller.
The WCM-070 is a Rako wired keypad for scene and level control. Its buttons send commands over the Rako control network; the lighting or motor load is connected to a separate controller.
The WCM-100 is a Rako wired keypad for extended scene and room control. Its buttons send commands over the Rako control network; the lighting or motor load is connected to a separate controller.
The WK-EOS provides configurable lighting control for a compatible Rako system. Choose the required button arrangement and finish from the available product options.
The WA-NEX extends a Rako wired Rakom system by creating two linked networks. It is intended for network layouts or cable distances that cannot be accommodated by a single correctly terminated network.
The WAVFR connects up to ten volt-free contact inputs to a Rako wired network. Inputs from suitable external equipment can be programmed to trigger lighting scenes or other Rako actions.
The RAK4-F combines four switched mains outputs with four configurable digital dimming outputs for compatible 0–10V, DSI or DALI lighting.
The RAK4-R provides four motor-control channels, each with two uncommitted volt-free relays, for compatible curtains, blinds and screens.
The RAK4-T provides four trailing-edge dimming channels in a central lighting rack. It can form part of a wired or wireless Rako installation using the appropriate Link device.
Older Rako WTC-Bridge wired network interface. See WK-HUB for a replacement route; compatibility and commissioning must be checked.
