Purchase this item and get 
The DIN-8S provides eight relay-switching channels for non-dimmable loads in a DIN rail enclosure. Configure outputs individually or in groups using Rasoft Pro, then operate them from compatible Rako wired keypads. A WK-HUB or WRB100 interface enables control from compatible wireless Rako keypads. Communication with the system is through a DIN-LINK.
Installation and documentation
Install within a compliant DIN enclosure using suitable fixings, supplied separately. Refer to the manufacturer documentation for load ratings, module dimensions and wiring requirements.
DIN-8S technical specifications
| Channels | Eight switched outputs |
|---|---|
| Load limits in datasheet | LED 300W; incandescent 600W; transformer 300W at power factor ≥0.6; motor 1A |
| Total rated current | 10A |
| Dimensions | 157mm wide × 110mm high × 59mm deep |
| DIN width | Nine modules |
| DIN bus usage | 8 DPU |
Selection and installation advice
Check each circuit and the combined current; do not multiply the individual load figures without checking the total limit. This switches loads on and off rather than dimming them. Allow the specified 150mm vertical clearance and use a suitable DIN enclosure. Plan the DIN bus, power budget and load wiring before first fix. Rasoft Pro commissioning is required; wireless keypad integration needs an appropriate WK-HUB or WRB100.
For the wiring diagram and complete installation requirements, see the Rako DIN-8S manufacturer datasheet.
Planning a system or checking an existing installation? Explore our Rako lighting control range and project advice. Send us the model numbers, room requirements and load or fitting details so we can help specify the right parts.
