Double-gang back boxes are used for surfacemount installation of low-voltage connectivity in hard-wall or open-office environments. They are compatible with all Leviton QUICKPORT and MOS flush-mount wallplates, and accommodate various raceway types.
Surface-mount back boxes shall accept NEMA compliant flush-mount plates supporting low-voltage connectivity. Both side and rear cable entry must be provided with rear cable knockout sized to accommodate cable bend-radius. Back boxes shall have a removable base and accommodate two sizes of raceway on sides, top, and bottom. Matching shallow and deep versions shall be available. Colors and configurations to be specified per schedule on plan. Back boxes shall be constructed of high-impact, fire-retardant plastic rated UL 94V-0, and be UL Listed and compliant with ANSI/TIA-568.0-D specifications.
FEATURES
• Back boxes have tie-wrap anchors at each inside raceway entry point
• Dual-gang back box has four fiber storage tie-wrap anchors located on base surface
• Screws and tape provided for mounting; optional magnet retention (41030-SMJ)
• Compatible with all Leviton multimedia wallplates, including QuickPort wallplates
• Two-piece construction
• Designed with rear and side cable access breakouts
• Larger breakouts in single-gang bases accommodate a larger cable bend radius
• Single-gang base can be mounted over an existing singlegang handy box or low voltage bracket.
• Dual-gang base can be mounted over a single-gang or a dual-gang box with appropriate single-gang or dual-gang reducer
DESIGN CONSIDERATIONS
• Suitable for category-rated data cabling
• Single-gang back box accepts Leviton MOS, QuickPort wallplates, and any Leviton single-gang wallplate
• Dual-gang back box accepts mounting of fiber ring (41290- DRx), MOS, QuickPort dual-gang wallplates, and any Leviton dual-gang NEMA style wallplate
• Back boxes include two-magnet retainers for optional surface mounting with magnets (magnets sold separately part 41030-SMJ)
• Side breakouts accept Wiremold and Panduit raceway or equivalent
• Rear and side cable access breakouts
• Available in two depths (1.45 and 1.89 inches)
STANDARDS & REGULATIONS
• UL Listed 1863 Communications Circuit Accessory
• CSA Certified
• ANSI/TIA-568.0-D




