Purchase this item and get 
As a Controlled Performance (CP) model, it is fitted with a fully sealed back box that provides an ideal air load for the drivers, optimising mid-range and bass performance while maintaining sonic consistency regardless of interior wall construction. These rigid, mineral filled enclosures reduce the sound from the back of the cabinet by around 30 dB. This range guarantees excellent audio quality and versatility, for superior level of sound isolation between rooms and floors.
It has a cut out dimension of 527 x 198 mm and uses the patented Quik-Link speaker cable connecter, which revolutionises the ease and speed of speaker installation. Tri-Grip has also been evolved for simple, reliable and strong fitment.
System Format
3–Way
Channels
1
Frequency Response, Installed (-6dB)
60 Hz – 35 kHz
Nominal Impedance
6 ohm
Minimum Impedance (20Hz to 20kHz)
4.8 Ohm @ 1 kHz
(4.3 Ohm @ 15 kHz)
Sensitivity (2.83Vrms@1m, Installed)
87 dB
Maximum Peak SPL* (single speaker @ 1m Z-Weighted)
118 dB
Continuous Power Handling (RMS into Nominal Impedance, Pink Noise with 6dB Crest Factor)
100 W
Recommended Amplifier Power (RMS into 8 OHM, Music Signal)
40 – 150 W
Drive Unit Complement
2 x 5″ (127 mm) RST II bass driver
1 x 3″ (76 mm) RST II mid-range driver
1 x 1″ (25 mm) C-CAM tweeter
Crossover Frequency
LF/HF: 550 kHz
MF/HF: 3 kHz
Bass Alignment
Sealed
Mounting Depth
97 mm (313/16″)
Cutout L x W
527 x 198 mm (203/4 x 713/16″)
External Dimensions (Including Grille (H x W x D))
540 x 212 x 102 mm (211/4 x 83/8 x 4″)
Weight (each)
4.4 kg (9 lb 11 oz)
Pre-Construction Bracket
WM-B
Cabinet Finish
Matt black & Orange & Bronze
Sold As
Single Unit
Corner Switch
On/Off
HF Switch
– /0/ +
